Tel: 0845 500 5858      Mobile: 07789 955640      Fax: 08701 322 350                             On-line Shop:  www.a1surveyequipment.net

 Cable Location - Leica DIGISYS

Construction sites have many and varied installed services and utilities under the ground. Obtaining accurate information about the location of these is a necessity before starting any excavations. Leica Geosystems' Service Location Tools allows you to search, trace and mark the line of all underground utilities before digging. The system increases your on-site safety and saves effort and money.

Below are some of the advantages of Leica Service Locator Tools:

• Digital Signal Processing - robust & error free location in the construction environment
• Easy to use - requires only minimal training
• Large push button operation
• Robust and waterproof - designed for tough working conditions
  

Digicat 100/200 DIGISYS - Built to meet the needs of today's tracing operations

The Digicat digital locator has been designed to meet the stringent and ever more complex requirements of today's tracing operations. Several vital safety features built into Digicat are rarely found in similarly priced units from other manufacturers.

• Operates with a wide range of signal generators
• Robust case (Conforms to IP57) Weighs only 2.5kg including Batteries
• 8 and 33 Khz tracing modes
• Low battery warning indication (6 x AA Alkaline Batteries - 40 hours Intermittent Use)
• Automatic default to power mode at maximum sensitivity
• Digital microprocessor control
• Dual waterproof speakers and a headphone socket with alkaline batteries
• Automatically defaults to power mode at maximum sensitivity (3m Depth)
• DIGICAT 200 now with Depth Estimation to 3m Accuracy typically better than ±10%

Digitex 8/33 Dual Frequency Generator

The Digitex 8/33 Dual Frequency Generator is the perfect tracing partner for the Digicat Locator. The unit is enclosed in a high impact structural polypropylene case.

• Operates with a wide range of location equipment
• Robust case (Conforms to IP57) Weighs only 2 kg including batteries
• 8/33 Khz modes for maximum flexibility
• Variable output level
• Battery and output level indicators (4 x C Alkaline Batteries - 40hrs Continuous Use)
• Automatic mode selection (Connection 250 metre range \ induction 150 metre range)
• Digital Microprocessor control

Digitrace 30/50/80

The Digitrace is a coiled 4.5mm (0.18") diameter fibregalss rod on a reel, which incorporates a copper wire. The wire is connected to a Digitex Signal Generator to pass a 33 or 8 Khz signal either through the entire length of the rod or just the end. Use this in tracing non-metallic pipes, such as drains or sewers, plastic pipes, plastic ducting, etc.

• Enables a complete length of drain, duct or pipe to be traced when used with Digitex
• Available in 30m, 50m and 80m lengths
• DIGIMOUSE 40mm for use with Digitrace

Download Brochure and Specifications